Getting the World off oil and gas and running on regenerative zero emissions electricity in 2013
Getting Off Oil, World news Monday, April 15th, 2013We can reduce food prices, the cost of living, national health care cost, cure all fossil fuel caused cancer and disease, drastically reduce CO2 pollution and climate change simply by getting the World off oil and gas and running on electricity. We have the technology today to power all of our vehicles and homes without using a drop of oil or gas and without using a drop of our finite supply of fresh water. We’ve had the technology for over a 100 years now. Henry Ford’s first car was electric. Thomas Edison also produced electric cars. Nikola Tesla successfully demonstrated how Ford and all automakers could power their cars using free unmetered electrical power but bankers like JP Morgan and Standard Oil founder John D. Rockefeller had different plans for the American people and for the World.
Today Ford is once again producing electric (hybrid) cars. None of the Big 3 are making all-electric cars even though the technology exists for them to do so. Why not? They claim that the limited range of electric cars makes mass producing them financially infeasible. Battery technology is still not able to extend driving range beyond 100 miles. Recharging infrastructure doesn’t exist and is apparently too costly to even consider starting construction. But I know this to be BS. Tesla demonstrated in the 1930s the technology that drastically extended the driving range of electric cars – far beyond any gas combustion vehicle manufactured today. Today, every vehicle manufactured by Ford, GM, Chrysler, Honda, Toyota, … can be easily converted into an all-electric zero-emission zero carbon fuel vehicle. The Drive-Charge ™ electric motor (designed by PRESS Core editor Paul W Kincaid) can easily achieve this.
Impossible! Not possible! Can’t be done. Tesla proved that it is possible using free unmetered energy that is all around us. He erected an antenna and harnessed radio waves and other electromagnetic waves and converted those electromagnetic waves into usable electrical energy and powered an electric motor in a gas to electric converted 1931 Pierce Arrow. The Drive-Charge electric motor uses today’s mass produced technology to generate self-sustaining electrical energy. This system functions exactly like the gasoline combustion engine in your car or truck and in all gas powered electrical power generators only it uses no gasoline to generate electrical power on-demand.
In all gas combustion engine gasoline is required to power them. When a gas combustion engine is supplied with a finite and costly carbon based fuel and started it immediately starts turning a crank shaft that is connected to either a transmission (provides motion for your vehicle) or to an electrical power generator motor (generates electrical power for your home). Without fuel the gas combustion engine cannot run and provide motion or generate electrical power.
In your vehicle’s engine compartment you will typically find: a gas combustion engine, an alternator, a battery, and serpentine belts that are connected to a number of other necessary engine components – water pump, air conditioner pump, power steering pump and cooling fan. The gas combustion engine is powering all of these parts and it is doing this simultaneously. As soon as you turn off the gas combustion engine all the connected parts and components are turned off too as they all rely on the “turning” of the engine’s crank shaft to power them.
In the drive-charge electric motor system the gas combustion engine is substituted with an electric motor – either an AC or DC motor. Now you know an electric motor is powered by electricity – either AC or DC current. For AC electric motors you need AC electrical current. For a DC motor you need DC electrical current. A car’s 12 volt battery stores DC electrical power and when fully charged provides enough electrical current to power a DC electric motor. The stored DC energy in that same battery can also be converted into AC electrical power using a mass produced store bought power inverter and provide AC electrical power to an AC electric motor.
If a single gas combustion engine can power many electrical and mechanical parts simultaneously and constantly using a simple serpentine belt a single electric motor can do the same. Instead of needing and using gasoline, diesel or natural gas to power your vehicle you now need and use a constant supply of electrical power. No gas combustion engine can produce its own fuel, but an electric motor can produce its own electrical power if it is connected – by either serpentine belt, shaft or chain – to electrical power generators – i.e. mass produced alternator, mass produced ignition coil and/or mass produced electrical power generators.
A mass produced car battery provides sufficient electrical power to cause the rotor in the electric motor to start turning. Once the rotor in the electric motor starts turning it causes the rotors in the serpentine connected alternator and electrical power generator to start turning and starts converting mechanical energy (rotor turning) to electrical energy in the form of alternating current. An alternator is defined as an electromechanical device that converts mechanical energy to electrical energy in the form of alternating current. Alternators are used in “all” gas combustion automobiles to charge the battery and to power the electrical system when its engine is running.
In a Drive-Charge™ electric motor powered vehicle the electric motor is both the vehicle’s engine and a component (part) in the vehicle’s electrical system. Hooking an alternator to an electric motor by way of of serpentine belt (the exact same way it is done in a combustion engine vehicle) the alternator continuously recharges the battery and powers the electrical system (including the connected “electric” motor engine). As long as the electric motor (engine) is running both DC and AC electrical power is generated simultaneously and perpetually by the attached alternator and electrical power generator.
Self-sustaining electrical power generation for your home and auto. Recharges itself and generates its own electrical power. Doesn’t need a drop of carbon fuel or natural gas. All-electric power regeneration. Zero emissions. Carbon-free energy to power the World.
Short URL: https://presscore.ca/news/?p=8006
You can generate a lot more electrical energy using the above method than any solar panel or wind turbine manufactured today. A $1000 wind turbine that is rated to generate 600 watts will never consistently generate 600 watts of power. It is entirely dependent on the wind. No wind, no power generation. A 15 watt solar panel has a max output of 15 watts. Only good during the daylight hours. How many things in your home can you power with just 15 watts? For both system you need expensive batteries.
You can generate your own “extra” electrical power using the Drive-Charge electric motor concept at home. Take any AC electric motor – like a furnace motor – and connect it to a stripped down gas powered generator. Instead of using gasoline to generate electrical power you use an electric motor. To keep your electrical utility bill down use the Drive-Charge at home by using a small amount of metered hydro electric power to power a small motor that is connected to a high output generator motor using pulleys and serpentine belts. You can generate 3500 watts of electricity using just a small amount of metered electrical power. You can build one indoors and run it indoors. Something you can’t do with a gasoline driven generator.
Instead of paying the hydro electric utility company for 3500 watts of electricity you only pay for what is used to power the furnace or farm duty motor. Use the Drive-Charge electric motor generator system to generate electricity and power all your power hungry appliances and heating system. Need more power? Simply connect another generator via another pulley and serpentine belt. Double or triple your electrical power generation using no added energy. Want to recharge car batteries at no extra cost to you? Connect an alternator to the furnace motor via an added pulley and serpentine built. This is exactly how your gasoline powered automobile recharges its battery only you won’t be using a drop of gasoline.
Amount of watts of electricity electric motors consumes and how much they can generate when connected via pulley and serpentine belt to an electrical power generator motor.
1/4 HP Motor consumes 400 watts of power but can generate 1500 to 8000 watts
1/3 HP Motor consumes 475 watts of power but can also generate 1500 to 8000 watts
1/2 HP Motor consumes 650 watts of power but can generate 1500 to 8000 watts
All anyone really needs is a 1/4 HP electric motor because the load remains constant.
A large number of readers have written me expressing genuine interest in the Drive-Charge electric motor and the water flow generator system. Several have stated that they plan on building my water flow generator system for their cottage this spring.
I am now in the process of putting together funding to build a working prototype of the Drive-Charge self-sustaining electric motor. The system will be build with brand new, mass produced, name brand parts. You can help with this project with a small donation sent by registered letter. I’ve already received $60 in donations from 2 readers for the project. Click on the Donate link at the top of the page for my mailing address.